INTRODUCTION
It has been made mandatory by the Food Safety and Standards Authority of India (FSSAI) that a designated logo should be printed on the label of all milk products, including composite milk products. This has been made mandatory under Food Safety and Standards (Labelling and Display) Second Amendment Regulations, 2026 which will come into force from July 1, 2028. This amendment has been made to ensure standard identification of dairy products and make it easy for consumers to identify such products while purchasing food items.
BACKGROUND
The FSSAI notification dated 6th November, 2026 was published in the Gazette of India dated 9th November, 2026. This amendment amends Schedule I to the Food Safety and Standards (Labelling and Display) Regulations, 2020, through the addition of a new paragraph (3).
The notification mandates that all milk and milk products, and in particular composite milk products falling under Regulation 2.1.1(5)(a) of the Food Safety and Standards (Food Products Standards and Food Additives) Regulations, 2011, shall be marked with a specific logo. This prescribed logo is a white water-drop mark displayed in the middle of a blue square.
This amendment will come into effect on 1 July 2028, allowing enough time for the manufacturer to make necessary changes to packaging material. The minimum size of the logo will be dependent upon the area of the principal display panel of the packaging material.
KEY POINTS
- All dairy products and any composite dairy products should be labelled with the prescribed logo after 1st July, 2028.
- The logo comprises a white drop of water over a blue square background.
- The proposed amendment adds paragraph (3) to Schedule I of the Food Safety and Standards (Labelling and Display) Regulations, 2020.
- The minimum size of the logo varies according to the size of the principal display surface.
- The proposed amendment is made under section 92 of the Food Safety and Standards Act, 2006.
ANALYSIS
An identity mark is defined for the milk and its products under the amendment. The requirement of a standardised logo will help consumers to identify the milk and its products easily.
The size of the logo depends on the area of the principal display panel. If the display panel area of the product is up to 100 square centimetres, then the minimum size of each side of the blue square should be 6 millimetres. The minimum size of each side of the blue square should be 8 millimetres for the display panels whose area is between 100 and 500 square centimetres. For display panels with an area of 500 to 2,500 square centimetres, it should be 12 millimetres, and for display panels whose area is above 2,500 square centimetres, it should be 16 millimetres.
The proposed amendment has been made pursuant to Section 92(1) together with Section 92(2)(k) of the Food Safety and Standards Act, 2006, following prior approval of the Central Government. The amendment also comes after the publication of the draft amendment in February 2025, followed by the consideration of any objections and suggestions received from the public. The amendment makes it mandatory for the manufacturers of such products to ensure that the logos of the products are included in the correct sizes on the packaging of the products. This will require that they look at their current labelling and do whatever is necessary in the form of modifications before the effective date.
CONCLUSION
This amendment will certainly be a step towards standardisation in the labelling of milk and dairy products in India. With a common identification mark, it is sure to make things easy for consumers when identifying the dairy products and ensure that there is uniformity in food labelling. This amendment will clearly demonstrate the need for compliance from the manufacturers on 1st July 2028.
“PRIME LEGAL is a National Award-winning law firm with over two decades of experience across diverse legal sectors. We are dedicated to setting the standard for legal excellence in civil, criminal, and family law.”
WRITTEN BY: DEBARATI CHATTERJEE


